We a wide variety of Liquid & Wax Maskants that can be used in many metal-coating applications. 
 
XL-88 Lacquer
Characteristics: Red vinyl solution lacquer
 It dries to touch in 15 -20 min. Approx. 1 hr air dry between coats & min. of 2 hrs air dry after final coat. for faster time use force air drying 20 min @ 150|F.
for use in masking parts prior to selective plating. It will hold hairline demarcations through alkali cleaners, acid rinses and all selective plating cycles.  XL-88 can be easily applied by dip, brush or spray. It is an excellent protective coating for precision parts in storage or in transit against mechanical damage or corrosion. 
 
MT-920 MASKANT
Characteristics: Orange reddish liquid. Viscosity * 35-40 cps Brookfield @ 20rpm; Weight per gallon, approx. 8.0 pounds; Flash point 25 degrees F., T.C.C. VOC * 5.6 lbs/gal. 
MT-920 is a vinyl maskant containing MEK and TOLUENE.
MT-920 is suitable for use in the following: Acid Gold; Indium; Lead; Electroless Nickel; Palladium; Rhodium; Silver.
 
MT-1024 PEELABLE MASKANT
Characteristics: Opaque Red; Viscosity * 5000-5500 cps, #5 spindle, 20 rpm; Weight per gallon, approx. 8.0 pounds. Flash point * 24 degrees F. T.C.C.; 4.8# per gallon VOC.
MT-1024 is butyl rubber compound containing toluene and vm&p naphtha.
Revised formula for better chemical resistance.
MT-1024 is suitable for use in the following: Electroless Nickel Plating Chemical Milling Hard Coat Anodizing Most acid solutions except those containing chromium.                                     
 
MT-2350 MASKANT
Characteristics: Deep red opaque, liquid. Viscosity * 2900-3100 cps Brookfield #4 spindle at 75 degrees F; Weight per gallon, approx. 7.9 pounds; Flash point 25 degrees F., T.C.C. 5.7# per gallon VOC.
MT-2350 is a dispersion containing MIBK and toluene.
REVISED VERSION WITH NO MEK
MT-2350 is suitable for use in the following: Hard Chrome Plating
 
MT-5137 MASKANT
Characteristics: Transparent Red Color; Viscosity – 320-340 cps #3 Brookfield, 30 RPM, 75 F.
Weight per gallon – 7.6 pounds; Flash point – 24 degrees F, T.C.C.; 5.4# VOC per gallon.
MT-5137 is suitable for use in the following applications: Copper, Cadmium, Tin, Precious Metal Plating, Nickel, most acidic solutions.
 
PLATER’S WAX MT-175
Characteristics: Microcrystalline Wax. Light to dark brown in color; five (5) eleven pound slabs per carton. Weight per gallon melted: approx. 6.8 pounds. One 55-pound box equals approximately 8.1 gallons liquid.
Plater’s Wax MT-175 is suitable for use in the following applications: Hard Chrome Plating; Lead; Acid Copper; Indium; Gray and Sulphamate Nickel; Silver.     
 
PLATER’S WAX HT-210
Characteristics: Light tan color; five (5) eleven pound slabs per carton; 55 pounds total weight. Weight per gallon melted: approx. 6.8 pounds. One 55-pound box equals approximately 8.1 gallons liquid.